The Yanartas Mesh Connector Specification
To allow Yanartas designs to share meshes between sensor board variants, we're using the following standardized interface between mesh and sensor board.
Yanartas 30-Pin Mesh Connector FFC-30P-6M4
FFC-30P-6M4 is a mesh connector carrying 6 mesh segments of one diffpair each through a standard 30 pin, 0.5mm pitch FPC connector. The sensor board contains the receptacle. The mesh can either integrate the mating connector in case of a FPC mesh, or use a second receptacle and a 30 pin FFC cable.
The reference mesh connector type on the sensor board is Hirose FH12S-30S-0.5SH. The dimensions of the mating FPC connector can be taken from Hirose's datasheets. Common 0.5mm FFC cables work.
Hint
Locking FPC connectors are available in two variants, either with the contacts on the top side or with contacts on the bottom side of the FPC. Both variants will have mirrored pinouts. The lever-style locking FPC connectors like the FH12S series usually have their pins on the bottom, and all pinout information here is based assuming pins on the bottom. Both connector variants can be used e.g.for mechanical reasons, but make sure to mirror the pinout when using a top-contact connector.
The connector carries a total of six mesh loops, each with two traces that make up a differential pair. We are labelling the loops L1...L6 and the two traces in each loop P/N for positive/negative polarity within the differential pair. So loop L1 consists of traces L1P and L1N, which leave the sensing board on connector pins SEND_L1P/SEND_L1N and return to it on pins RET_L1P/RET_L1N.
Pinout table
| Pin | Signal | Trace |
|---|---|---|
| 1 | GND | — |
| 2 | SEND_L1N | L1N |
| 3 | SEND_L1P | L1P |
| 4 | RET_L1P | L1P |
| 5 | RET_L1N | L1N |
| 6 | GND | — |
| 7 | SEND_L2N | L2N |
| 8 | SEND_L2P | L2P |
| 9 | RET_L2P | L2P |
| 10 | RET_L2N | L2N |
| 11 | GND | — |
| 12 | SEND_L3N | L3N |
| 13 | SEND_L3P | L3P |
| 14 | RET_L3P | L3P |
| 15 | RET_L3N | L3N |
| 16 | GND | — |
| 17 | SEND_L4N | L4N |
| 18 | SEND_L4P | L4P |
| 19 | RET_L4P | L4P |
| 20 | RET_L4N | L4N |
| 21 | GND | — |
| 22 | SEND_L5N | L5N |
| 23 | SEND_L5P | L5P |
| 24 | RET_L5P | L5P |
| 25 | RET_L5N | L5N |
| 26 | GND | — |
| 27 | SEND_L6N | L6N |
| 28 | SEND_L6P | L6P |
| 29 | RET_L6P | L6P |
| 30 | RET_L6N | L6N |
| MP | GND | — |